9
Doc. No.
：
P30001PE0101-07
Installation
•
Avoid installing the instrument in the locations indicated below.
This may cause instrument damage or malfunction.
-Locations exposed to direct sunshine
-Locations with high vibrations, humidity, or dust
-Locations with strong electric or magnetic fields
-Locations where liquid or oil could splash onto the instrument
-Locations with flammable gas, corrosive gas, or high heat sources.
•
The instrument will be installed by field service personnel
authorized by PSS.
Contact us if you need to move the instrument.
Storage
•
Unplug the power cable from the wall outlet if the instrument
will not be used for an extended period of time.
Precautions for Instrument Operation
•
There is a possibility of biohazard exposure while operating the instrument. Wear
appropriate personal protective equipment such as a mask, goggles, and gloves.
•
Pay close attention when handling biohazardous samples.
•
When operating the instrument under low temperature conditions, keep the instrument
power on.
•
Make sure that no foreign materials get into the instrument from outside.
•
Do not scratch or press the operation panel with knives or other sharp items.
•
Pay close attention when working around the piercing unit to prevent injury to yourself.
•
Barcode scanner uses LEDs. Do not look directly at the LED.
•
The fuse should only be replaced by field service personnel authorized by PSS. Contact
us for fuse replacement.
Caution
Prohibited
acts
Prohibited
acts
Unplug AC
power