A
B
12V
12V
SWT 5
SWT 6
SWT 7
SWT 8
EXTENSION
ADAPTOR
HANDSET LEAD
EXTENSION LEAD
RUN LOCK HANDBRAKE
IGNITION
SWITCH
RUN LOCK RESET
RUN LOCK HIGH START
RUN LOCK LOW START
SPECIAL
FUNCTION
INPUTS
MANUAL
CONTROL
INPUTS
OUTPUT
MONITORS
CONNECT PIN 11 TO
GROUND VEHICLE
EARTH 0 VOLTS
CONNECT BOTH PINS
A & B TO 12 VDC
Note:
Always use
extension lead to
ensure correct cable
orientation.
BANK A OUTPUTS
PIN ALLOCATION
BANK B OUTPUTS
PIN ALLOCATION
PROGRAMMING INTERFACE
BANK A
OUTPUTS
BANK B
OUTPUTS
1
1
3
3
6
1
1
16
18
20
LIGHT HEAD 6
5 or 21w bulb
0V
TO PIN 10
BANK B
0V
0V
SWT 5
SWT 5
Note:
LED’s light up next to the output
pin on banks A and B when activated
ACTIVATES BANK B PIN 10
CONNECT PINS 5, 8 11 & 14
TO GROUND VEHICLE
EARTH 0 VOLTS
RSG Engineering Limited
Telephone :
01543 438800
Fax :
01543 438801
Email :
Web :
www.rsg-ontop.com
1:
22
UNIVERSAL CONTROLLER (CVS-012) USER GUIDE
V2
K
4
: TYPICAL APPLICATION DRAWINGS
K
4 :
Typical Application Drawings - Run Lock
Basic wiring configuration for
Run Lock
application.
This diagram is to get new users started with the Universal Controller (CVS-012) and is based around using the device with the
Universal Handset Plus (MCS-T17), the range of Universal Multi-Way Handsets also applies.
UNIVERSAL HANDSET
PLUS (MCS-T17)
Universal Multi-Way
Handset range also
applies
