RM-804 & RM-805 Instruction Manual/English
84
13/10/2016 Version No. 001
Logic:
Operand1
Operator
Operand2
Fail
Logical OR,
Logical AND,
OFF*
Fail
Pass
Pass
Low
Low
High
High
Bin O**
Bin O**
Bin 1 ~ 8
Bin 1 ~ 8
*The OFF operator sets the Logic as true when Operand1 is true.
** Bin O is defined as outside bin 1~ 8.
Note
The Bin logic settings are not available for the RM-804.
Pressing ESC before pressing ENTER will exit from the selected
External I/O setting.
Handler Mode
Background
The Handler Mode setting determines the behavior of the result
signals from the handler interface. There are two settings, Clear
and Hold. The Clear setting will clear the results of the previous
test before starting the succeeding one and the Hold setting will
keep the test result of the previous test until the succeeding test
has completed.
The timing diagrams below are used as examples. All the result
signals in the examples are active high.