7
Terminals 10 and 11 will perform an in-between station stop.
When this sensor detects a magnet the StationMaster/Reverser
will use a fixed deceleration and acceleration rate for a station stop..
*This sensor can be simulated by pressing programming button #2
.
Terminals 12 and 13 are the optional STOP sensor.
In-between station stop Sensor - Only when programmed to use sensors
STOP Sensor - Only when programmed to use sensors
When the train is decelerating
and this sensor detects a magnet, the train
will immediately STOP. This sensor is not necessary unless an exact stopping
position is desired.
This sensor is REQUIRED when “Creep Stop” is turned on.
*This sensor can be simulated by pressing programming button #3.
Sensor Descriptions
Optional
RR-Concepts.com
C
R
R
1
2
3
4
8
9
10
11
12
13
StationMaster
1
2
3
4
8
9
10
11
12
13
StationMaster
