17
StationMaster “Deadman Timer”
A unique feature of the StationMaster is the
DeadmanTimer.
If a train is sensed on the track
and
no sensor has been
detected for 10 minutes,
the StationMaster will SHUT DOWN
and flash both the GREEN LEDs.
This prevents the condition where a train is hung up on an
obstruction and spinning it’s wheels, most probably grinding a
divot in the rails and wearing out wheels and gears.
Each time a sensor is triggered, or the train is not sensed, the deadman
10 minute timer is reset.
The Deadman Timer will be enabled AFTER the first
sensor or pushbutton is pressed after power up
.
How to
use
or
bypass
the Deadman Timer Shutdown:
* When the sensor connector is pulled and trains are running “manually”,
the Deadman Shutdown will not be enabled, unless a button is pushed.
* To run “manually” and also use the Deadman Shutdown, the DECEL
sensor needs to be pulled, and either the STOP or ACCEL sensor must
be run over.
RRConcepts.com
Flashing Green LEDs
Sensor
Connector
