Royal EVA 8700, Instruction Manual

Page: 68 / 72

1
2
051 052 102
0.0 3.0
051
7.0 3.0
070
070 082
087 086 085 088 089
3.0
5.0
1
2
These stitches are used to sew a decorative edge on
garments and table cloths.
SCALLOP HEM
DECORATIVE SCALLOP EDGE
1. Fold the fabric with right sides together and sew
near the edge.
2. Cut the fabric along the seam leaving an allowance
of 3 mm(1/8 )for seaming. Note the allowance.
3.Turn fabric with right sides out and gently push out
the curved seam press.
1. Place the fabric with wrong sides together and stitch
near the edge.
2. Trim along the outside edge of the stitching (being
careful not to cut the stitching).
3. Use seam sealant or fabric glue to secure edges
of the scallop stitching.
Wrong sides
together Wrong sides
together
Right sides
together Right sides
together
SCALLOP STITCH
ADJUSTING DECORATIVE PATTERNS
SEWING LIGHTWEIGHT FABRICS
When sewing lightweight fabrics, it is suggested that you use
interfacing on the backside of the fabric.
Use the standard presser foot for decorative stitch
patterns. An indentation on the underside permits the
flow of satin stitching and the open front allows clear
visibility. You can tailor some decorative stitch patterns
by adjust the length and width of the pattern. In LCD
display you will be able to see if adjustment to pattern
can be made. If the 00 is shown i both stitch lenght and
width no adjustment can be made.
Experiment with sample fabric until you get the
desired length and width.
Note: Some stitch patterns do not have both length
and width adjustment.
ENGLISH
34