Royal EVA 8700, Instruction Manual

Page: 62 / 72

a
3
1
5
4
2
6
005 007 006 008 010 011 012
0.0 0.4
005
Foot is not positioned correctly.
Lever is not lowered properly or buttonhole
Note: Machine will not start to sew if buttonhole
1. Mark position and length of buttonhole on
fabric.
2. Set button on the base and slide base forward
to secure button.
* If button does not fit on the base, adjust
slide on base to diameter of button plus
thickness of button.
a= Length of thickness
3. Pass upper thread through the hole of
buttonhole foot and attach buttonhole foot to
machine. Bring upper and bobbin threads to
the left under foot.
4. Position fabric under presser foot so that
the center line mark is in the center of the
needle opening in the buttonhole foot.
With the main part of the foot pushed to the
back lower the presser foot lever.
5. Lower the buttonhole foot lever so it is
positioned behind the raised finger on the
foot (see step 5 illustration).
6. Hold upper thread lightly and start the machine.
BUTTONHOLE SEWING
ENGLISH
28