Royal EVA 8700, Instruction Manual

Page: 54 / 72

2
3
8
4
6
5
1
7
3.5 2.5
001
000
1. Check the presser foot (General purpose
presser foot). Refer to page 11 for changing
the presser foot.
2. Place the fabric under the presser foot.
3. Lower the presser foot.
4. Hold back threads when starting machine.
Let threads go after sewing a few stitches.
5. Regulate the speed while sewing.
6. Stop machine when you reach end of seam.
7. Raise the presser foot lifter.
8. When you have reached the end of a seam,
stop sewing and turn the hand wheel toward
you to bring the needle to it’s highest position.
Raise the presser foot and pull the fabric out
from under the foot to the back of the machine.
Cut the threads on the thread cutter on the left
side of the machine.
While sewing, special care is required
around the needle area.
As the machine automatically feeds the
fabric, do not pull nor push fabric.
CAUTION: To prevent accidents.
START AND END OF SEAM
The machine is set to automatically sew straight stitches when the power switch is turned on.
STARTING TO SEW
ENGLISH
20