5mm
1cm
5mm
A
B
2
1
4
3
5
(3/16 )
(3/16 )
02
0
02
1
3.5
2.0
021
Reverse Side
Right Side
Reverse Side
Reverse Side
Overcasting
Note:
If too much of the stitching shows on the right side
of the fabric, change to a narrower stitch width or
move the guide on the foot to the left.
If the zigzag does not meet the fold, widen the stitch
width or move the guide on the foot to the right.
BLIND HEM STITCHING
This stitch is used when you do not wish stitches to show on right side of fabric.
1. Fold the fabric as shown on drawing.
Leave 5mm (approximately 3/16 inch)
extended past the forlded edge.
2. The guide (A) on the blind hem foot ensures
even feeding of the fabric when blind
hem stitching. The guide (A) is adjusted
by rurning the adjusting screw (B).
3. Place fabric so that the straight stitches
are on the extended hem edge and the
Zigzag stitches just catch one thread of
the folded edge. Turn the screw so that
the guide barely touches the folded edge
of fabric.
4. Lower the presser foot and sew hem,
guiding facric evenly along the guide.
5. Turn the fabric over when you have
completed sewing.
ENGLISH
27
Summary of Contents for EVA 8700
Page 1: ...EVA Royal 8700 BRUGERVEJLEDNING INSTRUCTION MANUAL 1 ...
Page 2: ......
Page 3: ...DANSK DANSK ENGLISH ENGLISH 3 ...
Page 4: ...ENGLISH DANSK 4 ...
