![background image](http://html1.mh-extra.com/html/royal/1632rec-s/1632rec-s_manual_1494074011.webp)
11
STEP 1- From rebar stake A (first corner), lay out the distance of
one side of the pool to rebar stake B. Care should be taken when
setting the direction of the rebar stake as this makes up the above
mentioned "Line 1" in Figure A. Use the measurement guides above
to determine how long Line 1 needs to be.
STEP 2- Starting at rebar stake B
(Second Corner) measure out the
appropriate length for “Line
2
”
and add
rebar stake C at the third corner,
squared to the previous corners.
→
Additional information on “squaring”
is
outlined on page 12.
STEP 3- Continuing to use the
measurements in the table above for
your specific pool type, measure the
appropriate length for “
Line 3
” to locate
the fourth corner with rebar stake D.
STEP 4- Measure back to the first
corner stake A, completing the layout.
Now measure the length of “Line
3
” (D
to C). The length should be equal to
the length of “Line 1” (A to B).
→
STEP 5- Square the layout by finding
equal diagonals of Lines 5 and 6.
(Details on pg. 12)
LAYOUT : STEP 1
LAYOUT : STEP 2
LAYOUT : STEP 3
LAYOUT : STEP 5
LAYOUT : STEP 4