background image

"$.t*OTUSVDUJPOTGPS

."(/&5*$-&%100--*()5
'03"#07&(306/%100-4

1PPMMJHIUJTTQFDJBMMZEFTJHOFEGPSBCPWFHSPVOE WJOZMBOETUFFMXBMMFEQPPMT*UVTFTBOJOUFSOBMNBHOFUUPBGGJYUIFMJHIU
UPUIFJOTJEFPGUIFQPPMXBMM&BTZUPJOTUBMMBOESFNPWF

$IBNQMBJO1MBTUJDT*OD

1JMMTCVSZ3PBE

3PVTFT1PJOU/:

 */4"$.7

1. 

OPEN

Grip firmly, use pressure and turn 
the clear top cover counter-
clockwise to open.

5. REMOTE OPERATION
Point the remote directly at the clear cover 
of the light unit. This is important when 
the unit is submerged in a swimming pool.

7. Ensure that all threads are 
engaged and cover is fully and 
evenly sealed on to gasket before 
submerging. Failure to properly 
seal unit will cause leaks, which 
will damage the light and void the 
warranty. 

DO NOT SUBMERGE THE REMOTE 

CONTROL, IT IS NOT WATERPROOF.

WARNING

1. Contains strong magnets. Keep light away from young children, mobile 

phones, magnetic media such as hard drives and other electronic devices.
2. Always make sure the product is thoroughly dry before inserting 

batteries.

STORAGE

1. Where freezing temperatures occur, there is danger of damaging the 

product. It is recommended to remove, clean, remove the batteries, and 

store the product in a safe place when the temperature drops below 

42ºF / 6ºC.
2. Thoroughly air-dry all pieces prior to storage.
3. If the product is not going to be used for longer than one month, remove 

the batteries, clean them and store light and remote control to prevent 

discharge and corrosion.

6. This product is for use above ground pool walls with a maximum thickness of 5mm (0.02”) or rigid 
steel walls. Submerge light no deeper than 25cm (9.8”).

2. Remove the battery cover by the 
notched tab. Insert 3 AA batteries 
(not included). Do not mix old and 
new batteries, do not mix alkaline, 
standard or rechargeable batteries.

3. 

CLOSE

Match the tab of battery cover to fit on 
the back cover. Replace the battery 
cover over the LEDs. Replace the clear 
cover, turning clockwise until snug. Be 
sure the gasket is clean, lubricated 
with silicone grease and properly 
sealed.

4. 

REMOTE CONTROL

Remove the tab to activate the 
battery. A #2025 button cell 
battery is preinstalled. The remote 
can control within 1.2m (47”) 
distance.

STEEL WALL

VINYL WALL

STEEL PLATE

(INCLUDED)

MAXIMUM DEPTH
25cm (9.8”)

OPEN

Reviews: