RVV 700 Standard Programming Service and Parts Manual
12
Energy Management (
Position P6A
): The wiring
harness connecting to this pinout powers the relays for
refrigeration, the evaporator fan, and lighting, including
brightness.
PIN WIRE FUNCTION
NUMBER COLOR
1
RED
5 VDC
2
BLACK COMMON
3
GREY
RELAY BOARD
4
YELLOW RELAY BOARD
5
GREEN RELAY BOARD
6
BLUE
RELAY BOARD
7
BROWN RELAY BOARD
8
-
NOT USED
9
-
NOT USED
10
-
NOT USED
11
-
NOT USED
12
-
NOT USED
13
-
NOT USED
14
-
NOT USED
15
-
NOT USED
16
-
NOT USED
17
GREY
LED ILLUMINATION
18
BLACK LED ILLUMINATION
19
GREY
LED ILLUMINATION
20
BLACK LED ILLUMINATION
Consumer Presence (
Position P6C
): These pinouts may
be available in the future, but at the time of this printing
they are not available.
SECTION 2: Vender Component Explanation
Options (
Position P7
): This pinout connects to an optional
electronic door lock and manual override switch, as well
as the door switch.
PIN WIRE FUNCTION
NUMBER COLOR
1
-
ELECTRONIC LOCK INPUT
2
-
GROUND
3
-
NOT USED
4
-
MANUAL OVERRIDE
5
-
GROUND MANUAL OVERRIDE
6
-
NOT USED
7
BROWN GROUND DOOR SWITCH
8
-
NOT USED
9
-
NOT USED
10
BLACK 5 VDC DOOR SWITCH
11
-
NOT USED
12
-
GROUND
13
-
NOT USED
Temperature (
Position P8
): The wiring harnesses
connecting to this pinout travel from the temperature
sensor and optional health sensor to the control board. The
temperature sensor is mounted adjacent to the evaporator
fan inlet. These harnesses are molded into the temperature
sensor and health sensor, and they should never be cut,
pinched, or spliced together if cut. If the harness is cut,
pinched, or improperly grounded, the sensor may give the
control board false temperature readings. Refrigeration
activity is based on the signal reported to the control board
from these sensors.
PIN WIRE FUNCTION
NUMBER COLOR
1
RED
TEMP. 5 VDC
2
WHITE TEMP. SENSOR SIGNAL
3
-
KEY
4
BLACK TEMP. SENSOR GROUND
5
RED
HEALTH 5 VDC
6
WHITE HEALTH SENSOR SIGNAL
7
-
KEY
8
BLACK HEALTH SENSOR GROUND
Summary of Contents for RVV 700
