Royal Vendors RVV 700, Operation And Service Manual

Page: 35 / 76

35
RVV 700 Standard Programming Service and Parts Manual
SECTION 3: Vender Programming
If <enter> is pressed at “Selection”, all the available
selection numbers will be displayed, followed by a box. If
<enter> is pressed at a desired selection number, the box
for that selection will toggle between checked (to block
that selection) or unchecked (to not block that selection,
leaving it available for sales at all times). Pressing
<enter> will save the status and return the display to the
unhighlighted selection number. Press <up> or <down>
to scroll through each available selection number. Press
<exit> to return to the “Selection” prompt within “Blocked
Selections”. Press <exit> again to return to the “Selection
Blocking X” prompt.
Stop Time
If <enter> is pressed at the “Stop Time” prompt, the
controller will enter the start selection blocking control
time setting routing. This time will be displayed in a 24-
hour format. The left two digits of the display show the
current hour setting; the right two digits show the current
minutes. The hour setting will be flashing. Pressing <up>
or <down> at this point will increase or decrease the hour
setting. If <enter> is pressed, the minute setting will flash.
Pressing <up> or <down> at this point will increase or
decrease the minutes setting. Pressing <enter> again will
save the displayed hour and minutes setting and return you
to the unhighlighted “Stop Time” prompt. Use <up> to
proceed to the next prompt, “Blocked Selections”.
Blocked Selections
If <enter> is pressed at the “Blocked Selections” prompt,
the display will show “All”, followed by a box. If <enter>
is pressed at “All”, the box will toggle between checked
(to block all selections at once) or unchecked (to block
only certain selections). Press <enter> to save the status
and return to the unhighlighted “All” display. Press <up>
to proceed to the next menu item, “Shelf”.
If <enter> is pressed at “Shelf”, all the available shelf
numbers will de displayed, followed by a box. If <enter>
is pressed at a desired shelf number, the box for that shelf
will toggle between checked (to block all selections on that
shelf) or unchecked (to block only certain selections on
that shelf or none). Pressing <enter> will save the status
and return the display to the unhighlighted shelf number.
Press <up> or <down> to scroll through each available
shelf number. Press <exit> to return to the “Shelf” prompt
within “Blocked Selections”. Press <up> to proceed to the
next menu item, “Selection”.