29.
Install the OE tow hook into the core support of the vehicle.
30.
Install the 2 spacers in between the tow hook and the winch plate brackets, using the OE bolts through the tow hook,
1” spacers and the winch plate bracket, secure using the supplied 10mm
-
1.5 nylock nuts and the 10mm flat wash-
ers.
See Photo 31.
31.
Torque the installed hardware in tow hook to 32 ft
-
lbs. using a 17mm wrench and a 16mm socket.
See Photo 32.
32.
Install the nut on the back side of the tow hook, tighten using a 30mm socket.
See Photo 33.
33.
Install the cross braces on each side with the notch on the cross brace facing outward of the vehicle, use the re-
moved OE hardware on the top side, tighten using a 13mm socket.
See Photo 34.
34.
Install the supplied 3/8
-
16 x 1 hex head bolt, 3/8 flat washers and 3/8
-
16 nylock nuts on the winch bracket.
See Pho-
tos 35.
Torque to 30 ft
-
lbs. using a 9/16 wrench and socket.
35.
Install the winch into the winch plate, use the hardware included in the winch kit.
See Photo 36.
Photo 31
Photo 32
Photo 33
Photo 34
Photo 35
Photo 36
Install tow hook and spacers.
Tighten installed hard ware.
Tighten the rear nut, using a 30mm socket.
Install the cross braces.
Install the bolts in the lower cross brace.
Install the winch into the plate.
Notch on
cross
brace.
Summary of Contents for JEEP 2017-19 WK2
Page 11: ......
