42.
Route the winch power wires through the radiator support to the remote battery jump studs, use a 13mm wrench to
remove studs and connect winch wiring.
See Photo 43 and 44.
43.
Locate the 2 license plate mount dimples in the front of the bumper.
See Photo 45.
44.
Align the template over the license plate mount dimple holes, use tape to hold the template onto the bumper.
See
Photo 46.
45.
Drill the hawse fair lead holes 10” apart in the center of the bumper, use a 3/4 drill. Drill a starting hole in the side of
the fairlead rope hole and trim using a body saw to remove the trimmed area.
See Photo 47.
46.
Using a sander or file, smooth around the trimmed areas.
See Photo 48.
Connect winch power to the positive terminal.
Connect winch power to the negative terminal.
Photo 43
Photo 44
Photo 45
Photo 46
Photo 47
Photo 48
Locate the dimples in the bumper.
Align the template onto the bumper.
Drill holes 10” apart.
Smooth around the trimmed areas.
Summary of Contents for JEEP 2017-19 WK2
Page 11: ......
