25.
Locate the driver and passengers side winch plate brackets, install the brackets using the OE hardware removed
from the inner structure and the crash bar.
See Photos 25 and 26.
Snug the bolts onto the brackets were they can
still be moved when install in the winch plate.
26.
Install the winch plate in between the brackets, align the top holes of the winch plate and the brackets. Secure using
the 7/16
-
14 x 1 1/4 hex bolts, 7/16 flat washers and 7/16 nuts in the 4 holes on each side of the vehicle.
See Photo
27 and 28.
27.
Torque the 4 bolts installed into the winch plate and the brackets to 45 ft
-
lbs, use a 5/8 wrench and socket.
See Pho-
to 29.
28.
Torque the OE hardware installed into the winch plate brackets to 32 ft
-
lbs, use a 13mm socket.
See Photo 30.
Photo 25
Photo 26
Photo 27
Photo 28
Photo 29
Photo 30
Install the drivers side bracket.
Install the driver and passengers side brackets.
Install the winch plate.
Align the top of the holes in the brackets.
Tighten the installed hardware.
Tighten OE hardware.
Summary of Contents for JEEP 2017-19 WK2
Page 11: ......
