6.
Remove side the bolts, on each side of the skid plate, using a 10mm socket.
See Photo 7.
Save hardware.
7.
Remove the 2 front bolts from the skid plate, using a 10m socket.
See Photo 8.
Save hardware.
8.
Remove the skid plate from the vehicle, set a side this will be reinstalled in a later step.
See Photo 9.
9.
Remove the 2 twist clips from the bottom of the bumper cover.
See Photo 10.
Save twist clips for later use.
10.
Disconnect the fog light wiring harness on each side of the vehicle.
See Photo 11.
11.
Using care releasing the bumper cover clips from under the headlight on each side of the vehicle.
See Photo 12.
Photo 7
Photo 8
Photo 9
Photo 10
Photo 11
Photo 12
Remove the side bolts from skid plate.
Remove the front skid plate bolts.
Remove splash guard.
Remove the 2 twist clips.
Disconnect the fog lights.
Release the bumper cover.
Summary of Contents for JEEP 2017-19 WK2
Page 11: ......
