5.
5.
5.
5. AWQ
AWQ
AWQ
AWQ Reset
Reset
Reset
Reset
: write down the measurement for each probe and press ENTER. The HP23 is ready to start a new
measurement
记录每个探头的测量数据并按
ENTER
保存
.HP23
就会准备好新的一组数据的测量。
5.4.3
5.4.3
5.4.3
5.4.3 Using
Using
Using
Using the
the
the
the AwE
AwE
AwE
AwE measurement
measurement
measurement
measurement option
option
option
option AWE
AWE
AWE
AWE
测量选项使用说明
The HP23 monitors the water activity and temperature values. When both values are at equilibrium
during a few minutes, the measurement is automatically ended. Depending both on the product being
measured and on the stability of temperature, measurements typically require 30 to 60 minutes.
HP23
监控水活性和温度值。当两个值通过几分钟后均达到平衡，测量自动结束。由于被测产品和温度稳定
时间的不同，测量时间要求
30-60
分钟。
NOTES
NOTES
NOTES
NOTES
:
说明：
o
The measurement starts simultaneously for both probes
两路探头同时开始测量。
o
Usually, the measurement ends at a different time for each probe
通常情况下，每个探头的停止测量时间不同
o
Each probe can be displayed by using the UP or the DOWN key
每个探头在线测量数值均可以通过按
UP
或
DOWN
键显示。
o
Do not press on ENTER until the measurement has ended for both probes
直到
2
路探头测量结束再按
ENTER
确认。
o
The HP23 can be used with one probe only
HP23
可以与单只探头配合使用
