2200004
_7225
2018 04 20
English
EN
Extra function G400B
An extra function can be connected on model
G400B,
if
a valve block with the ability to close
the “grapple open channel” is installed.
To connect a hydraulic tool to the extra function,
do as follows:
1. First retract the grapple arms to their closed
position.
2. Then turn the bolt on the directional valve
clockwise to close the grapple open function.
See Figure.
3. Remove the plugs from the outlets and connect
the hydraulically driven tool.
WARNING!
The extra function is always pressurized.
Even if the grapple module is used, the
extra function is pressurized in both
directions.
Closes the “grapple
open” function
Opens the “grapple
open” function
Outlet, extra function
Extra function RG- series
There is an extra function outlet in the quick coupler
on the RG series.
See the Quick Coupler section in the tiltrotator
instructions for use.
