2200004
_7225
2018 04 20
English
EN
Figure 1.
Figure 2
Adapting pins
The pins on grapple modules G910/G1060 are
adapted to fit different tools in the following manner:
1. Undo the nuts that secure the pins to the
grapple module.
2.
Move the pins and fit the nuts.
For other information regarding extra functions and
other Rototilt
®
functions, see the
Instructions for use
for Rototilt
®
.
Adaptation*
*(G910 and G1060 models)
There are two pin variants for the G910/G1060
grapple modules.
These pins can be adapted to fit different types
of quick coupler.
In position 1, the grapple module will fit e.g.
the following quick couplers.
See Fig. 1
.
• B27/RT80 (G910)
• S70 / RT60 (G910)
• OQ80/RT80 (G1060)
• S80/RT 80(G1060)
• CW30/RT60 (G1060)
• CW30/RT80 (G1060)
In position 2, the grapple module will fit e.g. the
following quick couplers.
See Figure 2.
• S70/RT80
• S2/RT80
• S1/RT80
