Smart Positioner
YT-3700 / 3750
Product Manual
Ver. 1.03
78
8.11.4 Actual Position View Mode (View Mode, VI NORM / REVS)
This function is used to set the "RUN AP" value on the LCD to be displayed as direct (NORM) or
reversely (REVS) as the actual position of the valve.
3 seconds
Press <UP> or
<DOWN> button
if the above is not
displayed.
Press <UP> or
<DOWN> button
if the above is not
displayed.
<UP>/<DOWN>
<ESC>
3 times
8.11.5 Polling address setting (POL AddR)
This function is used to set the address value of the positioner on HART(Highway Addressable
Remote Transducer) communication. The value from 0 to 63 could be set and default is 0.
3 seconds
Press <UP> or
<DOWN> button
if the above is not
displayed.
Press <UP> or
<DOWN> button
if the above is not
displayed.
<UP>/<DOWN>
<ESC>
3 times
