3
x
Start-up
30
FA ROTEX HPSU compact 308 - 02/2012
• Set correction values according to the system requirements (see tab. 4 -5, menu item "
correction value
" in section 4.3.1)
H3>G7E
?3;@?7@G7
EF3DFGB
EB75;3>8G@5F;A@
B3D3?7F7DE
E7DH;57
>A9;@
?3;@?7@G7
B3D3?7F7DE
E7DH;57
>A9;@
*',0B>GE
E7DH;57
B3D3?7F7DE
5ADD75F;A@H3>G7
;@F7D8357
D7E7F
5ADD75F;A@H3>G7
'**,H
'**,H4:
'**,6:I
'**,D
'**.
5ADD75F;A@H3>G7
'**,H4:
'**,6:I
'**,D
'**.
Fig. 3-5
Enter correction value level
Configure floor function (only if needed)
1. Deactivate domestic hot water generation.
Fig. 3-6
Deactivate domestic hot water generation.
2. For
im display, deactivate the weather-
dependent set value regulation.
3. Set the target flow temperature on the HPR1 main
control unit 40 °C factory setting) as follows:
Target flow temperature on the HPR1 > Value
”
FH tmax
“ on the auxiliary control unit HPRA1
Fig. 3-7
Deactivate weather-dependent set value regulation and set the
target flow temperature
4. Long press on the OK button.
Î
Main menu appears.
5. In the main menu, log in as a heating specialist (see
section "Enter the technician password", page 29).
Fig. 3-8
Call up the main menu
