BRP-Rotax
INSTALLATION MANUAL
Fusebox Regula-
tor A
The regulator plate A needs to be connected with the EMS Ground (cable lugs on the (en-
gine-) wiring harness). The terminal is conducted as a M4 screw connection suitable for
cable lug according to DIN 46225 (tightening torque: 1.2 Nm). The cable lugs need to be
evenly spread onto the three available terminals.
Figure 3.6: Fusebox -Regulator A
1
Regulator
2
Regulator plate B
3
Ground terminals
ATTENTION
A connection between regulator plate A and airframe ground should only be
done during supply of the EMS System by an external power source (e.g. during
engine start).
Effectivity: 915 i A Series
Edition 0/Rev. 0
Page 7
December 01 2017
Summary of Contents for 915 iS 3 A
Page 165: ......