Before starting with engine installation, please read the Installation Manual completely as it
contains important safety relevant information.
This Installation Manual for the ROTAX
®
aircraft engines should only be used as a general
installation guide for the installation of ROTAX
®
engines into airframes. It should not be used as
instruction for the installation of a ROTAX
®
aircraft engine in a specific type of airframe or
airplane. BRP-
Rotax
GmbH & Co KG does not assume any warranty or liability in this context.
In no event shall the Installation Manual be used without following the specific instructions and/or
requirements of the manufacture of an airframe or airplane (“Manufacturer”). For verification and/or
for release of the engine installation, the respective Manufacturer must be contacted. Any
modifications or adaptations to the airframe or airplane shall be carried out and/or be verified and
released by the Manufacturer only.
Improper use of the Installation Manual and/or non compliance with the installation requirements
of the Manufacturers can cause personal injury or property damage. BRP-
Rotax
GmbH & Co. KG
disclaims any liability for any and all damage and/or injuries (including death) resulting from the
improper use of Installation Manual and non compliance with the installation requirements of the
Manufacturer.
These technical data and the information
embodied therein are the property of BRP-
Rotax
GmbH & CO KG, Austria, acc, BGBI 1984 no. 448, and shall not, without prior written permission of
BRP-
Rotax
GmbH & Co KG, be disclosed in whole or in part to third parties. This legend shall be
included on any reproduction of these data, in whole or in part. The Manual must remain with the
engine/aircraft in case of sale.
Copyright 201
7
© - all rights reserved.
ROTAX
®
is a trade mark of BRP-
Rotax
GmbH & Co KG. In the following document the short form
of BRP-
Rotax
GmbH & Co KG = BRP-
Rotax
is used.
Other product names in this documentation are used purely for ease of identification and may be
trademarks of the respective company or owner.
Translation into other languages might be performed in the course of language localization but
does not lie within ROTAX
®
scope of responsibility.
In any case the original text in English language and the metric units are authoritative.
Summary of Contents for 915 iS 3 A
Page 165: ......