Rossler 021102, User Manual

Page: 18 / 22

- 18 -
Assembly
Figure1: Main Frame
1. Insert the Left and Right Stabilizer (2&3)
onto the Connecting tube (42), tighten with
the Allen bolts (11) and Arc washers (45);
2. Insert the Left and Right Stabilizer
(2&3) onto the Seat rail (1), tighten with the
Carriage Bolts (16), Flat washers (17) and
Acorn nuts (18); Fix the Connecting tube
(42) to the Seat rail (1) with the Hex bolt
(28), Flat washer (17) and Nylon nut (21).
3. Attach the Rear stabilizer (37) onto the
Seat rail (1) with the Hex Bolt (39), Flat
washers (40) and Nylon nut (41). Insert the
Plug pin (38) at a desire angle.
Figure 2: Seat
Attach the Seat (8) onto the Seat support
(4), secured with the Phillips Screws (25).
Then slide the well assembled Seat sup-
port (4) onto the Seat rail (1);
Fix the Rollers (23) to the Seat Support (4)
by using the Hex Bolts (44), Flat washers
(17) and Nylon Nuts
(21) as shown.
Figure 3: Handle-
bar
Fix the Left/ Right rowing Handlebar (5L/)
onto the Left and Right Stabilizer (2&3)
with the Hex Bolt (28), Flat washer (17) and
Nylon Nut (21) respectively as shown.
Figure 4: Pedals and Sensor
Attached the Pedals (6) onto the Pedal shaft
(35), secured with the Flat washers (27) and
Nylon nuts (21) as shown;
Connect the Sensor wire (14) with the wire
from the Meter (7), and then insert the
Meter (7) onto the Bracket on the Seat rail
(1).