background image

 

 

 
 
 
 
 
 
 
 
 
 
 

Copyright © 2014 by Rosslare. All rights reserved.

 

 

This manual and the information contained herein are proprietary to ROSSLARE 

ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’ 
(hereafter: "ROSSLARE"). Only ROSSLARE and its customers have the right to 
use the information. 
No part of this manual may be re-produced or transmitted in any form or by any 

means, electronic or mechanical, for any purpose, without the express written 
permission of ROSSLARE. 
ROSSLARE owns patents and patent applications, trademarks, copyrights, or 
other intellectual property rights covering the subject matter in this manual.  
TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN 
THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS 
AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND 

TRANSMITTAL TO THIRD PARTIES WITHOUT EXPRESS WRITTEN PERMISSION 
MAY RESULT IN LEGAL PROCEEDINGS. 
The furnishing of this manual to any party does not give that party or any third 
party any license to these patents, trademarks, copyrights or other intellectual 

property rights, except as expressly provided in any written agreement of 
ROSSLARE. 
ROSSLARE reserves the right to revise and change this document at any time, 

without being obliged to announce such revisions or changes beforehand or 
after the fact.

Summary of Contents for AY-D09M





























Reviews: