Programming the AY-Dx9M
22
AY-Dx9M Family Installation and Programming Manual
5.4
Selecting Proximity Card Transmission
Format (AY-D19M model only)
The AY-D19M has three different selectable proximity card
transmission formats.
Option 1 – Wiegand 26-Bit
Option 2 – Clock & Data
Option 3 – Wiegand Card + PIN
To select the Proximity Card transmission format:
1.
Enter Programming mode.
2.
Press
2
to enter Menu 2.
The Mode LED turns green.
3.
Enter the appropriate option number
for the proximity card transmission
format that you wish to select.
One beep is emitted on success.
The system returns to Transmit mode.
If an incorrect option number is entered, the reader returns to
Transmit mode and the keypad transmission format remains
unchanged.
5.4.1
Wiegand Card + PIN Transmission Format
This unique mode is intended to let host controllers get card and
keypad data simultaneously. This option overrules the selected keypad
transmission format and sends the keypad data as described below.
After a card is presented to the AY-D19M, the program LED starts to
flash in green to indicate that the unit is waiting for the PIN code. If
the entry of 1- to 5-digit keypad PIN code is disturbed and no digit
key or
#
key is pressed within 5 seconds, the keypad clears the card
Mode
Prog
Green
Mode
Prog
Green
Green
Mode
Prog
Red
