Programming the AY-Dx9M
14
AY-Dx9M Family Installation and Programming Manual
5.
Programming the AY-Dx9M
Programming the AY-Dx9M is done solely via the unit's keypad driven
programming menu system. To reach the programming menu system,
the AY-Dx9M must first be placed into Programming mode (see
Section
5.1).
During the AY-Dx9M's manufacturing process, certain codes and
settings are pre-programmed. These settings are the called the default
factory settings.
Table 1 shows the names of all the AY-Dx9M menus.
Table 1: Programming Menus
Menu Description
Menu Number
Selecting Keypad Transmission Format
Single Key, Wiegand 6-Bit (Rosslare format)
Single Key, Wiegand 6-Bit with Parity Bits
Single Key, Wiegand 8-Bit, Nibbles Complemented
4 Keys Facility Code, Wiegand 26-Bit
1 to 5 Keys + Facility code, Wiegand 26-Bit
6 Keys BCD and Parity Bits, Wiegand 26-Bit
Single Key, 3x4 Matrix Keypad
1 to 8 Keys BCD, Clock & Data Single Key
1
Selecting Proximity Card Transmission Format (AY-
D19M model only)
Wiegand 26-Bit
Clock & Data
Wiegand Card + PIN
2
Changing the Programming Code
3
Changing the Facility Code
4
Return to Factory Default Settings
0
