background image

Notice and Disclaimer 

vi 

AY-Dx9M Family Installation and Programming Manual 

Notice and Disclaimer 

This manual’s sole purpose is to assist installers and/or users in the safe and 
efficient installation and usage of the system and/or product, and/or software 
described herein. 

B

EFORE ATTEMPTING TO INSTALL AND

/

OR USE THE SYSTEM

,

 THE INSTALLER AND THE 

USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY 
REQUIREMENTS AND OPERATING PROCEDURES

 

The system must not be used for purposes other than those for which it 
was designed. 

 

The use of the software associated with the system and/or product, if 

applicable, is subject to the terms of the license provided as part of the 
purchase documents. 

 

ROSSLARE exclusive warranty and liability is limited to the warranty and 
liability statement provided in an appendix at the end of this document. 

 

This manual describes the maximum configuration of the system with the 
maximum number of functions, including future options. Therefore, not all 
functions described in this manual may be available in the specific system 
and/or product configuration you purchased.  

 

Incorrect operation or installation, or failure of the user to effectively 
maintain the system, relieves the manufacturer (and seller) from all or any 
responsibility for consequent noncompliance, damage, or injury. 

 

The text, images and graphics contained in the manual are for the purpose 
of illustration and reference only. 

 

All data contained herein subject to change without prior notice. 

 

In no event shall manufacturer be liable for any special, direct, indirect, 

incidental, consequential, exemplary or punitive damages (including, 
without limitation, any and all damages from business interruption, loss of 
profits or revenue, cost of capital or loss of use of any property or capital or 
injury). 

 

All graphics in this manual are for reference only, some deviation between 
the image(s) and the actual product may occur. 

 

All wiring diagrams are intended for reference only, the photograph or 

graphic of the PCB(s) are intended for clearer illustration and 
understanding of the product and may differ from the actual PCB(s).

Summary of Contents for AY-D09M





























Reviews: