Ross SRG-2200, User Manual

Page: 49 / 96

SRG-2200 User Guide (v6.0) DashBoard Menus • 49
LTC 1 Time Tab
SPG Time Tab
UTC Time Tab
The UTC Time tab allows the user to manually adjust UTC Time (where the SPG is not synchronized to an external
time source, such as NTP or VITC).
The
UTC Time field “
00:00:00:00
” is used to add / subtract time in the UTC DateTime menu. The sub- fields in
the field “
00:00:00:00
” represent hours : minutes : seconds : frames. When sub- fields are adjusted, the
corresponding fields in Running Time reflect the changes.
Table 6.16 LTC 1 Time Items
Item Parameter Notes
LTC 1 (DST) This is a DashBoard representation of the time
code being output on the LTC 1 connector
Timecode Standard # This allows the user to configure the LTC output
for various frame rates
Offset Second # Allows the user to add an offset (in seconds) to the
timecode embedded in the LTC 1 output
Offset frame # Allows the user to add an offset (in frames) to the
timecode embedded in the LTC 1 output
Date in User Bits Off Allows the user to turn off, turn on Date, or turn on
Date including time zone. This will be in
embedded in the timecode user bits.
Date as BCD (ST309)
Date as BCD (ST309
including timezone)
Date as BCD
(ITU/Leitch/BBC)
Is Daylight Savings
(DST Active?)
Read-only field to show current status of DST
Table 6.17 SPG Time Items
Item Parameter Notes
SPG # Time is the datum from which all Video and LTC
timecodes are offset
Timezone Offset Hour # Users can enter their timezone offset in hours from
UTC
Timezone Offset
Minutes
# Users can enter their timezone offset in 15 minutes
steps
Weekday # Read only field to show the day of the week
Date # Read only field to show the day of the month
Month # Read only field to show the month of the year
Year # Read only field to show the current year
Is Daylight Savings
(DST Active?)
Read-only field to show current status of DST