Ross SRG-2200, User Manual

Page: 47 / 96

SRG-2200 User Guide (v6.0) DashBoard Menus • 47
TriBlack Modifiers Tab
TriBlack Timecode Tab
Slot 12: System Time Tabs
Select Slot12: System Time to configure and view all possible time outputs from the SRG-2200 to suit your
location and application. The following tabs are available to allow comprehensive configuration and monitoring.
Table 6.14 TriBlack Modifiers Items
Item Parameter Notes
Video Format Allows the user to select the signal to be output on
the Tri/Black BNC
VITC Line # If the video format supports VITC, this is the line
the SRG-2200 will insert it on
F1/L10 Off For NTSC and PAL formats, adds a white bar to
the Field 1 line 10
On
SMPTE 318M Off For NTSC formats, inserts the 10 field
identification signal on lines 15 and 278
On
Table 6.15 TriBlack Timecode Items
Item Parameter Notes
Running Time # This is a DashBoard representation of the time
code being inserted into the Tri/Black output
Timecode Standard # This read only field shows the current video format
Offset Second # Allows the user to add an offset (in seconds) to the
timecode embedded in the Tri/Black output
Offset frame # Allows the user to add an offset (in frames) to the
timecode embedded in the Tri/Black output
Date in User Bits Off Allows the user to turn off, turn on Date, or turn on
Date including time zone. This will be in
embedded int he timecode user bits.
Date as BCD
Date as BCD (including
timezone)
Is Daylight Savings
(DST Active?)
Read-only field to show current status of DST