Ross SRG-2200, User Manual

Page: 30 / 96

30 • Functional Check Procedures SRG-2200 User Guide (v6.0)
Network Settings
The Network menu can be reached via the Slot16: System Setup tabs.
This is where the IP Address and Subnet Mask of the SRG-2200 can be set and monitored in conjunction with the
SW1
and
SW2
DIP Switches (on the rear panel).
Many of the parameters that can be configured in this menu require the user to obtain details from a Network
Administrator. Once configured, they are unlikely to change.
Option Enable Settings
The Option Enable menu can be reached via the
Slot16: System Setup
tabs.
These tabs list the installed Option Keys for enabled options within the SRG-2200.
Changes to this menu are extremely unlikely to occur, and so no formal description will be outlined here. For the
purposes of this functional check, simply scroll through the menu to check for any corrupted entry. Refer to the
section “
Slot 16: System Setup Tabs
” on page 51 for details of the various options.
Calibration Settings
The Calibration menu can be reached via the Slot16: System Setup . These tabs list the system calibration values
for the SRG-2200.
Changes to Calibration Settings should not be made under normal operation. These values are set during Factory
Test and should only be altered under factory supervision. Refer to the section “ Slot 16: System Setup Tabs ” on
page 51 for details of the various options.