Ross NWE-TS, User Manual, Page: 5 / 68

23.
This product contains safety critical parts, which if incorrectly replaced may present a
risk of fire or electrical shock. Components contained within the product’s power
supplies and power supply area, are not intended to be customer serviced and should be
returned to the factory for repair.
24.
To reduce the risk of fire, replacement fuses must be the same type and rating.
25.
Use only power cords specified for this product and certified for the country of use.
26.
The safe operation of this equipment requires that the user heed and adhere to all
installation and servicing instruction contained within the equipment’s manuals.
EMC Notices
United States of America
FCC Part 15
This equipment has been tested and found to comply with the limits for a class A Digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their own
expense.
CANADA
This Class “A” digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe “A” est conforme a la norme NMB-003 du Canada.
Maintenance/User Serviceable Parts
Routine maintenance to this product is not required. This product contains no user serviceable
parts. If the product does not appear to be working properly, please contact Technical Support
using the numbers listed under the “Contact Us” section on the last page of this manual. This
product is covered by a generous 3-year warranty and will be repaired without charge for
materials or labor within this period. See the “Warranty and Repair Policy” section in this manual
for details.
Warning
— This product includes an “Ethernet Port” which allows this product to be
connected to a local area network (LAN). Only connect to networks that remain inside the
building. Do not connect to networks that go outside the building.
Notice
— Changes or modifications to this equipment not expressly approved by Ross Video
Limited could void the user’s authority to operate this equipment.
Notice
— This is a Class A product. In domestic environments, this product may cause radio
interference, in which case the user may have to take adequate measures.