Ross NWE-TS, User Manual, Page: 33 / 68

NWE-TS User Manual (Iss. 01) Configuration • 3–3
7.
If you selected Program Number:
• Specify the channels of the Program group you wish to watermark from the
Program Number menu for the SID row.
• Verify that the PSIP Name field is updated with the correct channel information
8.
If you selected Audio PID, specify the audio packet identification number (PID) in the
Audio PID field for the SID row.
9.
If you are inserting NAES2 watermarks, specify how to resolve conflicts between data
already present in the incoming signal, and data to be added by the NWE-TS by
selecting an option in the
Insertion menu for that SID row. Choose from the following:
• Refrain — Select this option to not encode the NWE-TS data when incoming data
is present, and only transmit the incoming data. This should only be selected under
the guidance of Nielsen.
• Overwrite — Select this option to encode the NWE-TS data regardless of the
presence of incoming data.
10.
Select the Active box for the SID row. This adds the SID entry to the transport stream
watermarking once the
Submit
button is clicked. Note that the order that you add SID
entries determines their order in the stream.
11.
Verify the SID assignment parameters you selected in the above steps as follows:
• Click
Validate
located near the bottom of the tab.
• The read-only fields below the button update to report the status of SID entries
against the information in the input transport stream.
• The
Submit
button is now enabled.
12.
Verify that the Card State field, located above the Status tabs and in the top left corner
of the Device View window, does not report there are unsaved changes (yellow status
indicator).
13.
Click
Submit
to apply your changes and to start encoding.
Activating and De-activating an SID Entry
You can choose to enable or disable an SID entry from the transport stream watermarking. Note
that the order of SID lines is important as the first validate line that is submitted is given priority.
To activate an SID entry
1. Select the NWE-TS node in the Tree View of the NWE-TS you want to configure.
2. Select the SID Assignment tab in the Device View.
3. In the SID Assignment tab, locate the row for the SID that you wish to activate.
4. Select the Active box next to the appropriate SID row.
5. Click Validate .
6. Click Submit .
To de-activate an SID entry
1.
Select the NWE-TS node in the Tree View of the NWE-TS you want to configure.
2.
Select the SID Assignment tab in the Device View.
3.
In the SID Assignment tab, locate the row for the SID that you wish to activate.