manualshive.com logo in svg

Ross NWE-TS, User Manual, Page: 30 / 68

Share
Download
Ross NWE-TS User Manual Download Page 30

2–14 • Installation

NWE-TS User Manual (Iss. 01)

Software Upgrades

The NWE-TS can be upgraded in the field using the options available in DashBoard. 

To upgrade the software on the NWE-TS

1.

Contact Ross Technical Support for the latest software version file. 

2.

Select the 

NWE-TS

 node in the Tree View of the NWE-TS you want to configure.

3.

Select the 

Configuration

 tab in the Device View.

4.

Select 

Upload

, located near the bottom of the 

Configuration

 tab, to display the 

Select 

file Upload

 dialog. 

5.

Navigate to the 

*.bin

 file you want to upload.

6.

Click 

Open

.

7.

Click 

Finish

 to start the upgrade.

8.

Monitor the upgrade.

• An 

Upload Status

 dialog enables you to monitor the upgrade process.

• The NWE-TS auto restarts as part of the upgrade process. This restart is required 

after each software upgrade.

• The NWE-TS is temporarily taken offline for up to 7 minutes as part of the upgrade 

process.

• The upgrade is complete once the status indicators for the 

Card State

 and 

Connection

 fields return to their previous status. These fields are located in the top 

left corner of the Device View, and directly above the Status tabs.

Important

 — The NWE-TS outputs will be interrupted during the upgrade process. To avoid 

disruption of your video and/or audio, please place the NWE-TS in bypass before beginning, 
by clicking the 

Bypass

 button on the Configuration tab in DashBoard. After you have upgraded 

the necessary firmware components, restore the NWE-TS to active operation by clicking the 

Bypass

 button again.

Summary of Contents for NWE-TS





































































Reviews:

No comments