manualshive.com logo in svg

Ross NK-3G144, User Manual, Page: 33 / 64

Share
Download
Ross NK-3G144 User Manual Download Page 33

NK-3G144 User Guide (v04)

Installation • 33

For More Information on...

• detecting devices and querying devices, refer to the 

NK-IPS User Guide

.

Checking the Firmware Version of a Device

The routing switcher must operate with other devices that have v2.00 firmware or later. Firmware may be updated 
easily using DashBoard.

Using DashBoard to check the firmware version

Contact Ross Video Technical Support for the latest firmware versions.

To check the firmware version of any device using DashBoard

1. Open 

DashBoard

 and connect to the NK-IPS (see “

Connecting to the NK-IPS in the Routing Switcher 

System

” on page 32).

2. In the 

Basic Tree View

 section, double-click the device for which you want to check the firmware version.

The device tab for the selected device opens in DashBoard.

3. In the 

Device Details

 section of the device tab, view the 

Version

 field for the current firmware version.

Upgrading the Firmware Version of the NK-3G144

Firmware upgrade files can be obtained by contacting Ross Video Technical Support.

To upgrade the NK-3G144 software:

1. In 

DashBoard

, click 

Send Firmware

.

The firmware file browser opens.

2. Select software file ips22x.tfi.

3. Click 

Open

.

The 

Confirm Upload

 dialog box opens.

4. Click 

Continue

.

A progress bar is displayed. When the upload has completed, a confirmation box opens.

5. Click 

OK

.

Summary of Contents for NK-3G144

































































Reviews:

No comments