48 • Setting up a Routing Switcher
NK-3G144 User Guide (v04)
4. Select the device pages to send to the device. Use the information in
as a guide.
Any of the pages in the routing switcher device tab that contain information that has been changed are
automatically selected for sending to the routing switcher.
5. In the
Select Devices
list, select the device to which the current configuration is to be sent.
6. Click
Send
.
DashBoard automatically reloads the device tab.
For More Information on...
• sending a configuration using SmartPaste, refer to “
SmartPaste
SmartPaste offers a convenient way to apply a configuration file or a device configuration to other NK-3G144
devices. Selecting the
SmartPaste
check box of a device will send the configuration to that device.
SmartPaste can only be used to apply a configuration to another of the same device.
To SmartPaste a configuration
1. Open a device tab or configuration file.
2. Click
Send Configuration
.
The
Send Config to NK Device
window opens.
3. Select the device pages to send to the device (see step 4 in “
Sending a Configuration File to a Device
page 47 for the device page descriptions).
4. In the
Select Devices
list, select the
SmartPaste
check box of the device(s) to which the configuration will be
sent.
Selecting
SmartPaste
will send the
Device Details
as well as the selected device pages.
5. Click
Send
.
DashBoard automatically updates the device tab of the device(s) with the configuration.
SmartPaste can also be used by dragging a configuration file from the
File Navigator
to the
Device Details
area
of a device, however, the configuration is pasted but not actually sent to the device.
This method pastes only device pages and not the
Device Details
and can only be dragged and dropped into one
device at a time.
Table 5.7 Page Descriptions
Page
Description
Select Pages
Select this check box to select all device pages.
Home
Select this check box to select the information contained in the
Config
tab.
Inputs
Select this check box to select the input cards contained in the
Card Details
tab.
Outputs
Select this check box to select the output cards contained in the
Card Details
tab.
Other Cards
Select this check box to select the cards, other than input and output cards,
contained in the
Card Details
tab.
Summary of Contents for NK-3G144
