Ross ADC-8733AC, User Manual, Page: 48 / 60

4–18 • Menus ADC-8733A User Manual (Iss. 02B)
The following options are available:
• Black — The output is set to SD-SDI black. The Timing Mode must be set to Frame
Sync and the reference must be valid.
• No Output —No signal is present on the output.
• Freeze — The last valid image is automatically frozen (ADC-8733A-S only). The freeze
is determined by the Freeze Mode menu. The Timing Mode must be set to Frame Sync
and the reference must be valid.
C - Forced Black
This menu forces the output to SD-SDI Black. The output can be forced to SDI Black only if:
• in Line/Delay modes the input timing signal is valid; or
• in Line/Frame Sync modes the input timing signal or reference is valid.
D - Forced Monochrome
This menu turns off the color portion of the output SD-SDI signal.
F - Reference
The sync timing modes of the ADC-8733A require a reference. The recommended signal is a
stable composite analog black signal. This menu selects where the card will look for that
reference. The choices are BNC 8, Frame Reference 1, and Frame Reference 2.
Bank D Menus
This section summarizes the functions available on Bank D when using the AAM-8581.
Table 4.12 Bank D Menu and Parameters Table
Menu
Select
Menu Parameters HUD Values
0
Bank Select
–
–
A
B
C
D
BANK
A
B
C
D
1 Audio MUX Enable
m
+
– Off
On
MUX ENABL
ON
OFF
2 Embed Group Select
m
+
–
1
2
3
4
EMBEDDED
1
2
3
4
3 Audio Delay
m a
+
– Increase
Decrease
AUD DELAY (####) MS
4 Channel 1 Source
m
+
– Increase
Decrease
CHANNEL 1
MUTE
1
2
3
4