Ross ADC-8733AC, User Manual, Page: 11 / 60

ADC-8733A User Manual (Iss. 02B) Introduction • 1–3
Features
The following features make the ADC-8733A the most flexible, high-quality decoding card for
your analog to digital conversion requirements:
• YUV input from Betacam, MII and SMPTE/EBU formats
• RGB input from NTSC-related, MII and SMPTE EBU supported
• Four serial digital outputs
• 12-bit analog to digital conversion
• 2x over-sampling for excellent frequency response
• Automatic 525/625-line selection
• Can pass vertical interval signals
• Programmable vertical interval blanking
• Compact design on a single DA-sized card
• Heads-Up Display
• Optional Frame Synchronization (no daughter card required)
• Field-upgrade Frame Synchronization option available
• Extensive Proc Amp controls
• Freeze modes
• Horizontal and vertical timing adjustments
• Setup adjustment
• Black level offset
• Pass or clip Super Black
• Status indicator LEDs on card edge
• Choice of input timing source
• Choice of reference inputs
• Tracking Delay Output for companion audio synchronizer
• Built-in test signals (FF color bars, SDI Checkfield)
• Reports status and configuration remotely via the DashBoard Control System™
• Fits DFR-8310 and DFR-8321 series frames
• 5-year transferable warranty
• Fully compliant with openGear specifications
ADC-8733A-C Features
In addition to the above features, the ADC-8733A-C also includes:
• 4 channel audio embedding
• 24-bit ADC resolution
• Selectable maximum input level from -10dBu to +10dBu in 0.5dBu increments
• Audio gain in the analog domain via digital potentiometers
• ±0.05dB frequency response 20Hz to 22Hz
• Audio Clip LED on card-edge
• Alarm feature via DashBoard
• Silence alarm with threshold and alarm timeout settings
• Audio Delay up to 5 seconds