Ross ADC-8733AC, User Manual, Page: 34 / 60

4–4 • Menus ADC-8733A User Manual (Iss. 02B)
Signal Status
When the Signal Status indicator in DashBoard is green, the following conditions are present:
• A valid input timing signal is present and selected.
• A valid reference signal is present when a reference is required and that reference
standard matches the input standard. The Line Sync or Frame Sync modes require that a
reference signal be present.
When the Signal Status indicator in DashBoard is red, one of the following errors have occurred:
• A valid input timing signal is not present or selected.
• A valid reference signal is not present or selected.
• The reference does not match the input standard.
Setup Menus
Table 4.2 summarizes the Setup Menu options available in DashBoard for the ADC-8733A.
Signal
(Read-only)
Signal Status
Green
Indicates that the card is functioning
normally and no anomalies are detected.
Refer to the section “
Signal Status ”
Red
The reference does not match the input
standard or an error has occurred. Refer to
the section “
Signal Status ”
Input Status
Signal Present
Indicates the presence of an input signal
No Signal
Reference
b
Reference OK
Indicates the presence of a reference
signal
No Reference
Line Standard
525
Indicates that the input signal is 525-line
standard
625
Indicates that the input signal is 625-line
standard
a. This message displays when the following rear modules are installed when using the AAM-8581: 8310AR-030, 8310AR-031,
8320AR-030, 8320AR-031, 8320AR-040, and 8320AR-041.
b. The ADC-8733A only accepts BLS Reference signals.
Table 4.2 Setup Menu Items
Tab Title Item Parameters Description
Setup
Input Standard
RGB SMPTE
Specifies the standard of the input signal
RGB MII
a
RGB NTSC
a
YUV SMPTE
YUV MII
a
YUV BETA
Table 4.1 Status Tab Items
Tab Title Item Parameters Description