42
BA 417 BB 05 21 A2
Description
Default
Min
Max
Unit
Menu F = Modbus
F1 MODBUS address (1-247)
50
1
247
Adress
F2 MODBUS baud rate OFF, 9600, 19200 0
0
2
F3 MODBUS parity EVEN= 1, ODD= 2,
NONE= 3
1
1
3
F4 MODBUS OFF, read or write only
1
1
3
* Definition of term: PIR is used in this document as a name for motion detectors. Always a potential-free contact
is to be used. This can be an external switch, hygrostat or thermostat.
8.4
Time Program
Menu B
: The built-in weekly time program (calendar) allows 10 switching operations per day. Built-in weekly
time program is switched on/off in menu C with parameter C2.
A switching state entered at B1 and starts from
Reset the switching state by entering „- - - -„. Note that a shift is only enabled or active, if it´s different from „- - - -„
Example of entries in the weekly time program
B1 Week time program setpoint entries
B2 Weekly time program reset / delete
B3 Copying a day profile from the weekly time program to another day
B4 Setting the date and time
B5 Save or load the weekly time program into the Micro SD memory card
Example of entries in the weekly time program, if 4-step speed selector is selected
