Rosemount CT4215, Reference Manual

Page: 41 / 56

Consecutive Rejects Error Figure 6-9:
6.4 Line stop
The control system provides a signal that can stop the production line if there are errors on
the system.
The signal is sent to the STATUS connector shown in Figure 2-2 . The connection is a volt-
free contact and can be configured in Normally Closed (NC) and Normally Open (NO) from a
customer supplied 24 V.
Line Stop Plug Pin Numbering Table 6-1:
24 V line 0 V line
Normally Closed (NC) 1 2
Normally Open (NO) 3 2
The overall system is high when healthy (green light) and low when unhealthy (red light).
Operation
Reference Manual 29