Rosemount CT4215, Reference Manual

Page: 24 / 56

3.2 Installation instructions
Only Rosemount
™
Customer Care Representatives should install this instrument.
WARNING!
LIFTING HAZARD
The system weighs 268 lb. (119 kg). Beware of collision injury and topple injury when moving.
Emerson
™
recommends using a forklift to move the system.
WARNING!
CRUSH HAZARD
Be careful not to crush hands and feet when moving the system.
WARNING!
DRILL INJURY
Be careful to avoid injuring hands and eyes when drilling. Wear correct personal protective
equipment (PPE) at all times.
Procedure
1. Place the delivery crate in an open and easily accessible area, close to where the unit
will be assembled and installed.
2. Remove the instrument from the crate.
a. Remove the fixing screws (marked in red) from the front panel of the crate and
the front panel section. Place the front panel section from the crate in a safe
place well away from the working area.
b. Release the two straps located on the unit upright section.
c. Carefully remove the unit from the crate.
d. Remove all additional parts from the crate and place them to the side of the unit.
3. Ensure that all additional parts shown are present after unloading the crate.
Required parts are shown below.
Rosemount
™
CT4215 Installation Parts Table 3-2:
Item Description Quantity
A Reject assembly 1
B Light gate assembly 1
C Sample head 1
D Hardware kit 1
4. Place the unit enclosure at the desired position on the product line.
Installation
12 Rosemount CT4215