G A L A X Y ® A U R O U R A C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
32
Section 2 Basic Setup
Press [
enter
].
You will be returned to the OFED main menu, press the [
q
] key.
A reboot is required. Reboot the client by typing the following command:
reboot[enter]
After the reboot, the driver for your Infiniband HCA will automatically load. But
you need to perform some additional steps to actually connect to the LUN:
Type the following commands:
modprobe ib_srp srp_sg_tablesize=58[enter]
This loads the Infiniband SCSI RDMA client driver, and sets the transfer size
to an optimal value. Now you need to start a subnet manager for the Infiniband
client connection, by typing the following command:
service opensmd start[enter
]
There's one more Infiniband-related command to type, but it varies from client
to client, depending on the model of Infiniband card used. Type the following:
ls /sys/class/infiniband_srp[enter
]
