Cleaning
The washing frequency of clothing which has been worn depends on the degree of soiling, which varies according
to the work circumstances.
To ensure continued protection against chemicals, it is necessary to re-impregnate the garments on a regular
basis (at least every 5 washes) with a repellent finish. For the most appropriate procedure, your textile service
provider can contact the manufacturer of the clothing.
Some general guidelines:
n
high visibility clothing always needs to be washed separately.
n
Washing with limited mechanical action is preferred in order to avoid damaging reflective tapes. For the same reason, we advise you
to wash the garments inside out.
n
In order to prevent damage during washing, it is advisable to close zips and Velcro closures.
n
After washing the clothing must be rinsed thoroughly in order to remove all traces of detergents. In no case must fabric softener be
used.
n
Stains can best be removed as soon as possible using a cloth. Persistent stains can be treated locally with perchloroethylene if
necessary.
n
Specific instructions for industrial maintenance can be obtained from the manufacturer.
Tests at the laboratory have demonstrated that the requirements for the flame spread of standards EN ISO 11611 and EN ISO 11612 are
met after 50 wash cycles following the instructions indicated in the label of the garments.
Washing tests at a laboratory proved that the retro-reflective material still fulfils the requirements of the standard (EN471) after the
indicated (on the label) number of wash cycles according to the washing instructions. After these cycles, the efficacy of the tapes can
no longer be ensured. This is also marked on the label in the garments.
j
Maximum wash temperature is 60°C
remark – washing at lower temperatures will have a positive effect on the lifetime of the garments. The lifetime is
also influenced by the type and dosage of detergents.
H
Do not bleach.
V
Tumble drying possible at lower temperature.
E
Iron at maximum sole plate temperature of 150°C.
L
Professional dry cleaning in tetrachloroethene and hydrocarbons
The type examination and certification including quality follow-up of this protective equipment was carried out by : Centexbel,
Technologiepark 7, B-9052 Zwijnaarde (notified body with identification number : NB 0493).
9
2013-09-23
60910-ROO_gebr_ HVFRACH-13_viertalig.indd 9
29-11-13 10:12
