ROOTECH ACCURA 3300E, User Manual

Page: 43 / 88

Accura 3300E User Guide Chapter 3 Operation/Setup
ⓒ
2015 Rootech Inc. All Rights Reserved
Page 43
EVENT Log Mode
Generation of Event Alarms
Accura 3300E provides event alarms if the device detects an event such as fuse fail, phase open,
blackout, overtemperature, etc. When the event alarm is generated, the LCD backlight and the
EVENT LED at the bottom left side of the screen blink.
Clearing Event Alarms
When an event alarm is generated, the event alarm can be automatically cleared by long pressing
the EVENT button. Entering the EVENT Log mode, “ Event ” segment at the top menu bar is turned
on and displays up to 50 event logs.
Button Operation
Button Function
[DISPLAY mode]
Press
1
Select the display screen by up
down left right button.
[EVENT Log mode]
Long Press
2
Move to EVENT Log mode.
[The latest event log is displayed.]
Press Select event log.
Or
Long Press
Move to the latest event log.
Long Press
Exit EVENT Log mode and move to
DISPLAY mode.
1 The “[Beep]” sound occurs when pressing the button.
2 Press the button for more than one second. After one second, the “[Beep]” sound occurs.
Note
If an event occurs, the LCD backlight keeps blinking for 5 seconds by default, and users can set up
the hold time of the LCD backlight up to 9,999 minutes.
The screen automatically returns to the DISPLAY mode if there is no button operation for 10
minutes in the EVENT Log mode.