CORDLESS DRIVER DRILL
10
REVERSING SWITCH ACTION
This tool is equipped with an electric brake. If the tool consistently fails
to quickly stop after switch trigger release, have tool serviced at a Ronix
service center.
REVERSING SWITCH ACTION
This tool has a reversing switch to change the direction of rotation.
Depress the reversing switch lever from the A side for clockwise rotation
or from the B side for counterclockwise rotation.
When the reversing switch lever is in the neutral position, the switch
trigger cannot be pulled.
CAUTION:
- Always check the direction of rotation before operation.
- Use the reversing switch only after the tool comes to a complete stop.
Changing the direction of rotation before the tool stops may damage the tool.
- When not operating the tool, always set the reversing switch lever to
the neutral position.
SPEED CHANGE
To change the speed, first switch off the tool and then slide the speed
change lever to the “2” side for high speed or “1” side for low speed. Be
sure that the speed change lever is set to the correct position before
operation. use the right speed for your job.
CAUTION:
- Always set the speed change lever fully to the correct position. If you
operate the tool with the speed change lever positioned halfway between
the “1” side and “2” side, the tool may be damaged.
- Do not use the speed change lever while the tool is running. The tool
