USER MANUAL
11
may be damaged.
ADJUSTING THE FASTENING TORQUE
The fastening torque can be adjusted in 19 steps by turning the adjusting
ring so that its graduations are aligned with the poiner on the tool body.
The fastening torque is minimum when the number 1 is aligned with the
pointer, and maximum when the marking is aligned with the pointer.
The clutch will slip at various torque levels when set at the number 1 to
19. The clutch is designed not to slip at the marking.
Before actual operation, drive a trial screw into your material or a piece
of duplicate material to determine which torque level is required for a
particular application.
3
1
2
1.High Speed
2.Low Speed
3.Speed Change
Lover
16 18
1 2
1
1.Graduations
2.Adjusting ring
3.Drill Marking
4.Pointer
2
3
4
