CORDLESS DRIVER DRILL
8
INSTALLING OR REMOVING BATTERY CARTRIDGE
- Always switch off the tool before insertion or removal of the battery
cartridge.
- To remove the battery cartridge, withdraw it from the tool while pressing
the buttons on both sides of the cartridge.
- To insert the battery cartridge, align the tongue on the battery cartridge
with the groove in the housing and slip it into place. Always insert it all
the way until it locks in place with a little click. If not, it may accidentally
fall out of the tool, causing injury to you or someone around you.
- Do not use force when inserting the battery cartridge. If the cartridge
does not slide in easily, it is not being inserted correctly.
SWITCH ACTION
CAUTION:
- Before inserting the battery cartridge into the tool, always check to
see that the switch trigger actuates properly and returns to the “OFF”
position when released.
To start the tool, simply pull the switch trigger. Tool speed is increased
by increasing pressure on the switch trigger. Release the switch trigger
to stop.
1.Button
2.Battery Cartridge
1
2
8
