ROME TRCW-20, Operator'S Manual

Page: 8 / 66

8
CHECKLISTS
AFTER-SALE CHECK LIST
It is suggested that the following items be checked sometime during the first six months of operation of the
disc.
 Check the entire disc for loose or missing hardware.
 Check for broken or damaged parts. Make necessary repairs.
 Re-torque the hardware.
 Check to make sure the safety chain is properly installed.
 If possible, run the disc to see if it is functioning properly.
 Review the entire
Operator’s Manual with the customer and stress the importance of proper and regular
lubrication and safety precautions.
 Advise the customer of optional attachments that are available.
(Date Checked): (Signature):
EACH MORNING OF OPERATION CHECKLIST
 Lubricate items required daily and those whose lubrication time is due.
 Look for loose or missing bolts or parts.
 Check hydraulic system for leakage.
 Check the tire pressures and wheel bolts.

Check all pins to be sure that retaining hardware is in place.
 Check all oil-bath bearing assemblies and inspect for leakage.
 Be sure that all gang components are tight on the axles and axle nuts meet the recommended torque
foot-pound pressure specified in the Axle Nut Torque Chart.
BEFORE EACH SEASON CHECKLIST
 Be sure recommended lubrication has been performed.
 Inspect all bearings to be sure they are tight and not badly worn.
 Check hydraulic system for proper operation and leakage.
 Check the tire pressure and wheel bolts.
 Be sure the proper operating adjustments have been made for your conditions.
 Inspect for loose or missing bolts.
 Inspect all the oil-bath bearings for any sign of leakage.